Cost To Install A Free Standing Gate

Gates cost $200 to $600 depending on material and complexity to build or install. Generally, gate prices start at about 25% more than a single panel of the same material. A well-placed gate can significantly enhance visual appeal. Wooden fences do not necessarily need wooden gates.

$1,200 – $4,500 Wood Stove + Install
$250 – $800 Install Labor Only

The average cost to install a wood stove is $1,200 to $4,500. A wood burning stove costs $400 to $3,500, while a wood stove insert runs $1,200 to $3,400. Wood stove installation costs $250 to $800 for labor, and installing a ventilation system or chimney costs $300 to $3,500. Get free estimates from fireplace installers near you or view our cost guide below.

Wood Stove Installation Cost

A wood stove installation costs $1,200 to $4,500 on average, or between $2,300 to $7,000 if a chimney is installed. Labor alone to install a wood burning stove costs $250 to $800 and includes stove fitting, construction of a chimney, stove pipe, and ventilation system, hearth pad, and wall coverings.

Wood Stove Installation Cost
TypeAverage Cost
Wood Stove Install Using Existing Chimney$1,200 – $3,500
Wood Stove and Chimney Installation$2,300 – $7,000
Pellet Stove Install Using Existing Chimney$1,500 – $5,000
Pellet Stove with Chimney Installation$3,000 – $8,500
  • A wood-burning stove warms a home quickly and cheaper than oil, propane, or electricity
  • Installing a wood stove can increase home sale value by $1,000 to $5,000
  • Not all types require electricity and can provide heat continuously
  • Adds a cozy ambiance to a room
Average Wood Stove Cost
National Average Cost$2,486
Minimum Cost$400
Maximum Cost$5,500
Average Range$1,210to$4,437

Table of Contents

  1. Wood Stove Installation Cost
  2. Wood Stove Cost
  3. Additional Wood Stove Cost Factors
  4. Frequently Asked Questions

Cost Factors To Install Wood Burning Stove

According to the Hearth, Patio & Barbecue Association, the average wood stove installation costs $3,000 to $4,000, including the stovepipe, ventilation system, and labor. Costs depend on if an existing chimney is used, the height of the house, and the type of stove pipe and hearth installed.

Wood Stove Installation Cost Breakdown
ItemAverage Cost
Wood Stove$400 – $2,500
Venting / Chimney / Stove Pipe$300 – $3,500
Hearth Pad$200 – $500
Wall Coverings$60 – $500
Labor$250 – $800
Total$1,210 – $8,300

Wood Stove and Chimney Installation Cost

The average cost of installing a wood stove and chimney is $2,300 to $7,000, which includes the stove, stovepipe, hearth pad, wall protection, and Class A chimney.

Get free estimates from wood stove professionals.View Pros

Cost To Install Chimney For Wood Stove

The average cost to install a chimney for a wood stove is $1,500 to $3,500 depending on the location and design. A Class A chimney pipe is installed through a wall, cathedral ceiling, or attic. Constructing a chimney inside the home instead of along an exterior wall helps it function properly.

Cost To Install Chimney For Wood Stove
LocationAverage Cost
Along Exterior Wall$2,300 – $3,200
Through Cathedral Ceiling$1,800 – $2,100
Through Attic / Second Floor$2,400 – $3,300

A chimney is also known as a twin-wall flue system, a double-wall chimney pipe, a triple-wall chimney pipe, or an insulated chimney pipe.

Cost of Wood Stove Pipe

A wood stove pipe costs $100 to $550 on average, depending on the length and design. Costs are higher for cathedral ceiling installations since more stovepipe is required. A stovepipe is the internal ventilation pipe that connects the stove to a nearby chimney.

Pellet Stove Venting Cost

A pellet stove venting assembly costs $300 to $1,000 installed. A pellet stove venting pipe does not need to transition to chimney pipe and can be used to the termination point outside the structure. An exhaust fan pushes air out through the vent pipe. Pellet stoves can be vented horizontally through a wall or vertically through a roof.

Installing a Wood Stove into an Existing Fireplace

The cost of installing a wood stove in an existing home’s fireplace is $900 to $3,100, including labor and materials. The price depends on the type of stove or insert, height of the house, type of chimney liner, and whether an existing hearth is used.

  • Freestanding Stove – Installed directly in front of an open fireplace on the existing hearth. The hearth pad will likely need to be extended. The chimney needs to be retrofitted with a stainless steel chimney liner.
  • Fireplace Insert – Installed directly into an existing open fireplace. Inserts use blowers to circulate the air, which requires electricity. A stainless steel chimney liner must be installed in the existing chimney for a wood-burning insert. Pellet inserts can be vented through the chimney using a vent pipe.

Cost of Converting Gas Fireplace To Wood Burning Stove

The average cost to convert a gas fireplace to a wood-burning stove is $100 to $300. Converting is not possible with a ventless fireplace. Extra prices to convert include replacing the stainless steel liner, parts, masonry repair, and chimney construction or replacement.

Converting an existing masonry fireplace to a wood insert makes it 60% to 80% more efficient, and 90% more efficient for a pellet insert. It generates the same heat as a fireplace with one-third of the fuel and sufficient enough to heat an entire home.

Lining Chimney For Wood Burning Stove Cost

Chimney liner installation costs$900 to $3,800 for stainless steel, while high-end materials cost up to $7,000 to install. A flexible or rigid chimney liner matches the chimney down to the same size as the flue collar on the stove.

Install Wood Stove In Basement Cost

The average cost to install a wood stove in a basement is $5,000 to $9,500 depending on if there's an existing chimney. Expect to spend between $5,000 and $6,500 with an existing chimney, while building a new chimney from the basement up adds $2,000 to $3,000.

Cost To Install Wood-Burning Stove In Conservatory

Installing a wood-burning stove in a conservatory costs $1,500 to $5,000 on average and includes a Class A chimney. Installing a pellet stove instead is more cost effective because it can be vented through an exterior wall using a stovepipe.

Wood Stove Installation Cost For Mobile Home

Installing a wood-burning stove in a mobile or manufactured home costs $1,300 to $3,100 on average. Wood stoves installed in a manufactured home must have rear heat shields and be top vented, with a hard ducting system for bringing in fresh combustion air.

Brands such as Unforgettable Fires make a portable, steel, non-catalytic, gasifier wood stove designed for small spaces such as boats, RVs, or cabins.

Outdoor Wood Boiler Cost

The average outdoor wood boiler costs $6,000 to $12,000 to install based on the size and model. Outdoor wood furnaces can dramatically reduce heating costs, and large systems can supply hot water to your home, garage, pool, or spa.

Wood Stove Cost

The average cost of a wood-burning stove is $400 to $4,400, depending on the size, material, and fuel type. The cheapest are small, non-catalytic stainless steel stoves designed to heat small areas, while the most expensive are cast-iron catalytic stoves that efficiently heat large areas.

Cost of Wood Burning Stove
Heating Capacity (Square Feet)BTUAverage Cost
Small (1,000)24,000 – 54,000$1,500
Medium (2,000)28,000 – 94,000$2,300
Large (3,000)38,400 – 152,000$2,700

*Living areas need to be open to get this coverage.

Consult with wood stove professionals near you.View Pros

Choose from a freestanding stove, catalytic, non-catalytic, or hybrid, fireplace insert, pellet stove, or multifuel.

Catalytic vs. Non-Catalytic Wood Stoves

Catalytic vs. Non-Catalytic Wood Stoves
Cost$1,700 – $4,400$400 – $2,900
  • Lower particulate output and less creosote buildup
  • Most efficient (72% thermal efficiency vs. 63% for non-catalytic)
  • Burn more cleanly and efficiently at low to moderate heat outputs (starting at 500ºF)
  • Catalytic unit should last six or seven heating seasons before needing replacement for $100 to $400
  • Easier to operate, not necessary to monitor the temperature
  • Less expensive
  • Must reach 1000ºF for smoke in the secondary chamber to ignite, which is difficult to achieve
  • Difficult to operate; may require more knowledge or experience
  • Buildup from improper operation can clog catalytic combustor which must be periodically replaced
  • Catalyst must be cleaned after every cord burned and replaced every five to eight years.
  • Release more particulate matter into the air
  • Can’t hold fire for as long as a catalytic stove
  • Uses more fuel to produce the same amount of heat
  • Greater potential for creosote buildup, as there is less combustion of smoke exhaust
  • The baffle may degenerate due to exposure to high temperatures and need replacement.

A hybrid stove combines a catalytic combustor with a secondary combustion chamber to achieve a cleaner burn throughout the burn range.

Standalone / Freestanding Wood Stove

The average cost of a freestanding wood stove is $1,600 to $3,500, depending on the material and combustion type. Freestanding wood stoves have a larger surface area with all sides exposed, which radiates heat more efficiently than fireplace inserts. A blower to circulate air is optional.

Freestanding Wood-Burning Stove Prices
MaterialAverage Cost
Stainless Steel$1,600
Cast Iron$2,100
Cast Iron w/ Soapstone Panels$3,500
  • There is no difference in heating performance between stainless steel and cast iron. However, cast iron gaskets eventually wear out.
  • Soapstone stoves use thermal mass heat storage to absorb and slowly release heat for several hours after the fire is extinguished.

Wood Stove Insert Cost

An average wood stove insert costs $1,200 to $3,400 to install with a chimney liner or vent pipe, depending on the square footage you need to heat. Inserts fit inside your existing fireplace and heat 1,000 to 3,000 square feet depending on their size.

The enclosed design of a wood stove insert increases the efficiency and allows wood to burn for 3 to 5 hours before you need to add more. Most wood-burning inserts use a fan to circulate the air around the firebox to increase efficiency.

Wood stove inserts are typically not compatible with prefabricated metal fireplaces unless it's the same brand that uses the same chimney components.

Find wood stove insert installers near you.View Pros

Multifuel Stoves

Multi-fuel stoves cost between $1,900 to $4,300 to install and can burn various types of fuel. Some burn fire logs, firewood, smokeless coal, biomass fuels, processed silage pellets, wood pellets, and even corn. Multifuel stove installation requires an exhaust pipe designed for biomass.

Wood Stove Prices By Brand

The brand of wood stove also influences the overall cost. Although, the price of installation remains the same for each.

Cost To Install A Free Standing Gate
Wood Stove Prices By Brand
BrandAverage Prices
Jotul$1,000 – $3,700
Unforgettable Fires$4,800 – $5,200
Lopi$900 – $1,500
Blaze King$2,200 – $4,000
Woodstock Soapstone$2,400 – $4,300
Vermont Castings$1,200 – $3,600
Franklin (Used)$350 – $1,000
Shrader (Used)$350 – $1,000

Wood vs. Pellet Stoves Cost

Wood stoves cost $2,000 to $4,000 to install, while pellet stoves run $1,500 to $3,000 on average. Pellet stoves cost less to to install and can be direct-vented without an expensive chimney or flue. However, pellet stoves cost $20 more per month to fuel over the heating season.

Wood vs. Pellet Stoves Cost
Stove Cost$2,000 – $4,000$1,500 – $3,000
Electricity Cost Per Season$0$72
Fuel Usage Per Season6.5 cords7.3 tons
Fuel Cost Per Unit$175 – $580 per cord$150 – $300 per ton
Fuel Cost Per Season$747 to $2,242$787 to $2,362
  • Cordwoord is cheaper to burn per BTU. Lower carbon footprint than pellets.
  • Wood can be sourced locally from your land, and lighter to carry in batches.
  • Doesn't require power. Continues to provide heat in emergencies or power outages.
  • Has fans with cooler exhaust. Sides don't get hot to the touch.
  • Can be vented directly through an exterior wall or installed with less clearance than a wood-burning stove.
  • Exhaust is cleaner at less than 1 gram per hour compared to 2 – 7.5 grams for wood stoves.
  • CO2 production is 74% less per kWh than wood stoves.
  • New models use a thermostat to maintain a set temperature.
  • Many insurance companies dont' rate pellet stoves a hazard like wood stoves.
  • Typically cost more to install than pellets.
  • Needs tending every 8 to 24 hours depending on thermal storage and use.
  • Remove built-up ash daily.
  • More complex and requires more maintenance. Has expensive components that can break down.
  • The fan-forced exhaust is under positive pressure, and vent pipe joints must be sealed with high-temperature silicone to ensure containment.
  • Pellet production has a slightly higher carbon footprint than harvesting cordwood.
  • Pellets are sold in heavy 40-pounds bags and may not be readily available in all areas.
  • Requires electricity or generator to run or will shut down during power outages.
  • Some pellet stoves require premium-grade pellet fuel and may perform poorly if a standard grade is used. Pellets are made of compressed sawdust or wood chips.
  • Logs for wood stoves are sold by the cord, while pellet fuel is sold in bulk by the ton or in 40-pound bags, usually by the pallet.
  • On average, 1 ton of pellets = 1.5 cords of wood.

Additional Wood Stove Cost Factors

Wood or pellet stoves must be properly installed and maintained to operate safely and be approved for insurance. All newly installed wood-burning stoves must meet federal EPA certification standards. It's illegal in most states to sell a home with a non-certified wood stove.

Fireplace Hearth Cost

The average hearth installation costs $200 to $500 depending on the material. A stove board or hearth is required and sits under the stove and stovepipe and acts as a noncombustible base. Hearth pads are made of concrete underlayment board with tile, brick, marble, limestone, granite, or slate on top.

The pad must extend a minimum of eight inches around all sides, 18 inches in front of loading doors and under any horizontal run of the stovepipe from the stove to the chimney. An average hearth pad size is 3’ x 3’.

Building A Brick or Masonry Fireplace

Building a masonry hearth, chimney breast, and chimney costs $3,500 to $5,600 to showcase a fireplace insert. Installing a prefabricated brick fireplace costs$2,000 to $3,000, while an authentic mason-built brick fireplace runs $10,000 and up.

Wood Stove and Chimney Cleaning Costs

A chimney cleaning costs$150 to $250 on average and comes with a level-1 inspection. According to The National Fire Protection Association (NFPA), a chimney must be swept at least once a year. The best time to have a chimney cleaned is in spring, after the heating season.

Stove Size & Heat Output

Based on your local climate, choose a stove that emits the right number of BTUs per square foot of the room or area. If the stove is too small, you may be tempted to over-fire it, causing damage to the stove. Too large, and constant under-firing will reduce its efficiency and promote more rapid creosote buildup.

The best indicator of heat output of a wood-burning stove is the size of the firebox. For pellet stoves, the best indicator of heat output is the feed rate, or the number of pounds per hour the auger can deliver to the firebox.

Wood Stove Installation Regulations

First, check the EPA’s regulations for wood-burning appliances to see if your city allows the installation of wood-burning stoves.


  • Permits cost $50 to $250 and are typically required. Licensed contractors will get the permits for you.
  • If there is no nearby outlet, another outlet will need to be installed and wired for it. Hiring an electrician costs$120 to $150 to install an outlet.
  • Smoke and carbon monoxide detectors are required before installation and cost $30 to $100 on average.
  • Pellet stoves require much less clearance for installation than wood-burning stoves.

Chimney Requirements

The chimney must extend at least three feet above the roof’s surface, two feet above anything within 10 feet of it, and 3 feet above the roof peak. A roof bracket is required for stability if the chimney extends more than five feet above the roof.

A Class A termination cap, or chimney cap, must be installed above the minimum height extension to prevent birds from entering. There should be no more than two elbows in the chimney pipe, as they inhibit drafts, and an interior install is preferred to an exterior wall install, as exterior chimneys produce more creosote.

Stove Pipe

The stovepipe is also called interior flue or black pipe and can be 22- or 24-gauge, single-wall or double-wall (used for close clearances). Note that no stovepipe can pass through walls, ceilings, floors, or windows.

If construction requires more than eight feet of stove pipe (such as with a vaulted or cathedral ceiling), it is recommended to use a double-wall stovepipe, which provides insulation and keeps the combustion gasses hot enough to vent up by the natural draft.

Wood Stove Ventilation

All wood-burning stoves require combustion air—natural draft, mechanical draft, or direct-vent sealed combustion. You may need to install outside combustion air intake for a wood-burning or pellet stove to meet local building code requirements.

Proper ventilation is typically a duct that runs from a four-inch hole in an outer wall directly to the firebox or a location near the stove. For pellet stove venting, it is possible to use a special wall thimble kit that includes an air intake opening alongside the exhaust vent.

Wall Protection

The average cost for wall protection range from $66 to $500 depending on the materials chosen—stone veneer, brick, or stove board. This is mandatory for combustible walls or ceilings located closer than 36 inches to the stove and 18 inches to the stovepipe (internal flue).

Wall Protection Needed by Clearance
Stove ClearanceStovepipe ClearanceProtection Needed
36 inches18 inchesNone
18 inches12 inches1/4-inch noncombustible board, spaced 1 inch from combustible wall
12 inches9 inches28-gauge sheet metal, spaced 1 inch from combustible wall
12 inches9 inches28-gauge sheet metal on 1/8” noncombustible board, spaced 1 inch from combustible wall
  • A metal heat shield attached at the back of the stove can reduce the clearance from 36 inches to 12 to 18 inches, depending on the type of stove. These typically cost from $130 to $200.
  • The average cost for masonry wall protection is $26.48 per square foot, including materials and labor.

Insurance Premiums

Some insurance companies increase the cost of your premium by 2% if you install a wood stove. You must notify your carrier and provide proof that it was installed by an NFPA-certified professional. The stove must be UL-approved, and you must have smoke and carbon monoxide detectors in the home.

Wood Stove Removal Cost

The cost to remove a wood stove is $0 to $250, not including any home repairs. Some recycling programs will remove an old wood stove from your home at no cost. Some states have ruled that non-certified old wood stoves must be destroyed.

Wood Stove Safety Tips

Wood stoves can be made safe as long as the tips below are followed.

  • Keep all combustible materials clear from the stove and flue pipe.
  • Burn only dry, well-seasoned wood. Wood that is not correctly seasoned will produce too much smoke exhaust.
  • Dispose of hot ashes outside the building in a closed metal container.
  • Make sure carbon monoxide detectors are installed and test them frequently to ensure they are working.
  • Consider opening a window for extra ventilation.
  • Never start a stove fire with flammable fluids such as gasoline or fire starter used for grills.
  • Never burn garbage or other non-wood materials in a wood or pellet stove.
  • Never allow a wood fire to burn unattended.
  • Supervise children around a wood stove, and teach them never to touch the sides or doors. Consider putting up a physical barrier or safety screen (included with all wood stoves).
  • Install a switch lock to prevent children from turning the appliance on.
  • If your wood or pellet stove has a remote control, keep it out of reach of children.
  • Have the stove and chimney inspected by a chimney professional before every heating season.

Energy Savings

The cost of running a wood-burning stove is offset by the energy savings. Using a wood stove for zone heating allows you to heat the most-used rooms in the house more than rooms that are not in use. Zone heating typically saves 10 to 40 percent on annual heating costs.

Tax Credits and Rebates

The federal government offers a Residential Energy Credit of $300 for the cost and insulation of a biomass (pellet) stove that's at least 75% efficient. While nearly all wood and pellet stoves claim 75%+ efficiency to qualify, many are actually less than 75% efficient.

Many states offer rebates for replacing an old wood stove with an EPA-certified wood stove, up to $5,000.

Frequently Asked Questions

What Is the Lifespan of a Wood-Burning Stove?

The average lifespan of a wood-burning stove is 10 to 20 years, depending on proper operation, maintenance, and quality of the stove. While the cheapest stoves may last only two to three heating seasons, high-quality wood stoves can last a lifetime.

Are Wood Burning or Pellet Stoves Cost Effective?

Both pellet and wood burning stoves are cost effective and provide more heat per dollar than oil, gas, or electricity. High-efficiency wood-burning stoves cost more to install than pellet fuel appliances. However, running a pellet stove costs about $150 more per heating season.

New EPA-certified wood stoves are about one-third more efficient than old wood stoves as well as central wood-burning furnaces and boilers, which compensates for the higher cost within about two heating seasons.

Who Installs Wood Stoves?

Fireplace and chimney professionals install wood burning stoves. The best wood-burning stove installation contractors are often chimney sweeps. For wood stove installation, make sure you hire a National Fireplace Institute (NFI) or Chimney Safety Institute of America (CSIA) certified professional.

What’s the Cost of Logs for a Wood-Burning Stove?

Cordwood or logs for a wood-burning stove cost $175 to $580 per cord on average. Most homeowners spend $700 to $2,300 per heating season on cordwood for a wood stove.

How Much Does a Bag of Wood Pellets Cost?

A 40-pound bag of wood pellets costs $4 to $8, depending on the quality. Choose premium-grade pellets for top-fed pellet stoves or standard-grade pellets for bottom-fed stoves. Wood pellets with no binding agents or fillers cost up to $52 per bag and are used for grills and smokers.

Does a Wood-Burning Stove Increase Home Value?

On average, a high-efficiency wood-burning stove increases a home's value by $1,000 to $5,000. Sixty percent of homeowners look for a fireplace or wood stove when purchasing a home.

How Much Is A Used Wood Stove Worth?

Cost To Install A Free Standing Gates

A used wood stove is worth $300 to $1,000 depending on its condition, size, age, and material.

Still have questions? Ask a fireplace pro.View Pros

Hiring A Wood Stove Installer

Installing a wood stove must be done by a professional certified by the National Fireplace Institute (NFI) or the Chimney Safety Institute of America (CSIA) to meet applicable regulations and to qualify for coverage by homeowner insurance companies.

A chimney professional can advise you on the appropriate wood stove size for your home, and the safest and most efficient chimney design. Improper chimney design or construction can result in poor operation of the stove, damage to the stove, and fires.

However, much of the cost to install a wood-burning stove is in the chimney installation. If you have an existing masonry chimney, you may be able to safely install a correctly sized, flexible chimney liner yourself to attach to a freestanding wood stove. Start by getting free estimates, then compare your options.

Get free estimates on HomeGuide from trusted wood stove installers:

Cost To Install A Free Standing Gate Opener

  • Wood Burning Basics. (n.d.). PDF File.
  • Choosing and Installing Wood- and Pellet-Burning Appliances. (n.d.).
  • What You Need to Know When Burning Wood. (n.d.).
  • Wood Stove Installation and Operation. (n.d.).
  • Wood Stove Installation. (n.d.). PDF File.
  • Save Energy with a Wood-Burning Fireplace Insert Installation. (2018).
  • Wood Stoves. (n.d.).
  • Wood Stove Prices. (n.d.).
  • Double Wall Stove Pipe. (n.d.).
  • Wood Stoves vs Pellet Stoves. (2019).
  • ​Installing Woodstoves and Inserts. (n.d.).
  • Wood stoves & other home heating. (n.d.).
  • Permit for Wood stove insert installation. (2015).
  • Woodstove Cost Savings. (2019).
  • Recommended Standards For Installation. (n.d.).
  • Advantages & Disadvantages of Catalytic Combustor Stoves. (2014).
  • Choosing the Right Wood-Burning Stove. (n.d.).
Millions of people ask HomeGuide for cost estimates every year. We track the estimates they get from local companies, then we share those prices with you.

20+ Wood Stove Installers near you

Get free estimates on HomeGuide from trusted wood stove installation companies:

Get free estimates

Quick Summary: Outdoor Outlet Installation Cost

Generally, it will cost between $350 and $400 including labor and materials to install an outdoor outlet for a newer home. If the home is older and needs additional wiring or electrical panels installed, the average price ranges between $1,000 and $1,400. Cutting through and repairing drywall will add to the total cost.

Whether you're looking to power electric landscaping tools, plug in holiday lights, install mood lighting for a patio or deck, or power decorative features, an outdoor outlet makes the task much easier.

Since an outdoor electrical outlet is susceptible to the elements, it needs to include weather protection in addition to the ground fault circuit interrupter (GFCI). The GFCI protects the outlet, as well as anything connected to it, if it comes into contact with water. For outlets powering items you regularly connect and disconnect, weather protection needs to be no more than a plastic cover that opens and closes over the outlet. If the outlet will be used to power items that remain plugged in indefinitely, such as decorative features, you want an in-use cover.

Cost varies mainly according to how difficult the installation is. The difficulty of installing an outdoor outlet depends greatly on the age of the home, the location of the outlet, your location and its average electrician rates, and whether you need to also install a new electrical box.

How Much Does Installing an Outdoor Outlet Cost?

Costs vary widely according to where you live, as electricians charge drastically rates in different parts of the country. Expect to pay, on average, between $75 and $150 per hour if you hire an electrician to install your outdoor outlet. The total cost will depend on how complex your job is. For example, if the electrician needs to install an electrical box, this takes more time and adds to the overall cost. If you need additional wiring or electrical panels, which is common for an older home that has fewer interior outlets, the average price ranges between $1,000 and $1,400. For the average newer home, though, you're looking at around $350 for your installer's labor, with the cost of the outlet itself averaging between $25 and $50.

Try Our Free Electrician Quote Request Tool

Tell us some details about your needs and get connected to pre-screened companies in your area. Compare free price quotes from multiple companies and save time and money instantly! No obligations to hire or purchase ever!

Additional Cost Considerations

Since the main item determining the cost of installing an outdoor electrical outlet is the time required to complete the job, you need to look at the factors that might increase that install time.

  • Age of the home: Older homes have fewer indoor outlets, which means they also have fewer available power sources for a new outdoor outlet. This raises the odds your electrician needs to install additional wiring or electrical panels, adding significantly to the time required to complete the job.
  • Outlet location: If your outdoor outlet is installed in an area with existing wiring or access to an electrical box, it takes less time to install and reduces labor costs significantly. Of course, the opposite is also true.
  • Electrical boxes: Most of the time, an outdoor outlet needs an electrical box, sometimes called a junction box. These significantly improve the safety of your outlet, as they help maintain a connection and prevent fires. Installing one adds to the overall time the job requires.
  • Drywall: Your electrician may need to cut through the drywall to install the outlet. This, as well as repairing it, it may add to the overall price.

Hiring an Electrician

You want to protect yourself and your property by hiring a licensed, insured, professional electrician. Luckily, the Internet makes it easier than ever to research contractors before hiring one to complete your install.

First, make sure the electrician is licensed to work in your state. You can do this by checking the state's labor department site or licensing board to ensure the electrician has an active license. Once you know that, check the Better Business Bureau to see whether there are complaints filed, as well reviewing as consumer rating sites. Next, make sure the electrician obtains the necessary permits to complete the job. Unlicensed electricians don't have this ability; a lack of permits indicates he or she is unlicensed.

As far as insurance, you want an electrician with ample liability insurance, preferably at least $1 million. This protects you and your home if there's an accident. Finally, always request quotes up front, preferably from at least three providers. This allows you to compare costs to ensure you get the best contractor at the best price.

Try Our Free Electrician Quote Request Tool

Tell us some details about your needs and get connected to pre-screened companies in your area. Compare free price quotes from multiple companies and save time and money instantly! No obligations to hire or purchase ever!

If you have any other projects you've been putting off because you weren't ready to hire an electrician, this may be a great time to take care of them. Bundling your projects may save you some money, particularly if the electrician includes a minimum trip or travel charge and you don't expect the installation of your outlet to meet that minimum time requirement.